Colour Changing LED Tape
The colour changing LED tape uses a high quality LED chip which mixes Red, Green and Blue to create any colour that is required instantly.
Restaurants, Bars & Homes - Using our wireless controller you can select any colour you require allowing you to change the look and feel of you venue every night or even have a slow colour scroll which will slowly go through all the colours during the night. The tape & controller can also output a bright pure white when required as well as haveing options for strobing effects and quick colour changing effects for music.
Night Clubs & Bars - The RGB Tape can be controlled using DMX to give full control. Effects like white strobing, multi colour strobing, colours changing to the beat and colour scrolling can easily be achieved using any industry standard DMX Controller.
The RGB tape is available as a 7.2 Watts per metre version or a 14.4 Watts per metre (Double the brightness) version.
| Product: | Colour Changing | High Power Colour Changing |
|---|---|---|
| Photos |  |
 |
| Wattage | 7.2W Per Metre | 14.4W Per Metre |
| Voltage | 12v or 24v | 24v |
| Reel Lenght | 5 metres (12v) or 10 metres (24v) | 5 metres |
| Colours | Mixable RGB Chip can output any colour | |
| IP Coating | No coating IP54 or Heat shrink coating IP67 available | |
| SMD Chip | 5050 SMD LED Chip | |
| No. of LEDs | 30 LEDs per Metre | 60 LEDS per Metre |
| Lumens | Up to 500 lm (when on white) per metre | Up to 1000 lm (when on white) per metre |
| Dimentions | 12mm wide x 4mm depth | |
| LED Life | 70,000 Hours (Over 8 years of continus use) | |
| Cut Points | Every 100 mm | |
| Mounting | 3M Double sided tape or a standard hot glue gun can be used to hold the LED Tape if required | |
| Close Up Non coated Photo |  |
 |
| Product PDF |  |
|
Wireless controller for the Colour Changing LED Strip Lights
DMX Receivers (Decoders)
The DMX receivers are used to controller the LED tape using the industry standard DMX Protocol. You can link up to 30 DMX receivers using standard RJ45 cables as shown below. It is possible to connect over 30 DMX receivers using a DMX splitter.
Each DMX Reciver can control the following:
| Product: | Standard 7.2W RGB | High Power 14.4W RGB |
|---|---|---|
| 12V | 10 Metres | - |
| 24V | 20 Metres | 10 Metres |
The DMX Receiver with DMX Wall Controller
